A new compact wheel excavator, model HT-10W, has been introduced to meet the growing demand for light-duty digging equipment that can be quickly moved between scattered job sites. Built around a wheeled chassis rather than a tracked undercarriage, this 1-ton mini digger is designed for contractors, landscapers and rental operators who need fast road transfer without loading onto a trailer.
The HT-10W is offered with a fully enclosed operator cabin as standard, setting it apart from open-canopy mini excavators. The sealed cabin shields the operator from rain, wind, dust and flying debris, allowing work to continue in weather conditions that would otherwise stop the job. For operators in mild climates, a canopy version is also available.
At 1030 mm wide and 2450 mm long, the machine is compact enough to pass through standard garden gates, backyard alleys and indoor renovation doorways. The tail turning radius is only 765 mm, making it practical for digging alongside walls, fences and property boundaries without frequent repositioning. An optional side-swing boom allows the arm to pivot left and right, further reducing the need to shift the entire machine.
Three gasoline engine choices are offered — Koop192, Ducar420 and Rato420 — so buyers can match the power unit to local emission requirements and budget. The hydraulic system operates at 16 MPa with a flow rate of 28.8 L/min, delivered through a JX10-01 valve block and a PG05-10G83L gear pump. The BM23-15 travel motor drives the wheels at up to 5.6 km/h.
Technical Specifications
| Item | Specification |
|---|---|
| Model | HT-10W |
| Overall Length | 2450 mm |
| Overall Width | 1030 mm |
| Upper Structure Width | 750 mm |
| Overall Height (Cabin) | 2260 mm |
| Standard Tire Width | 215 mm |
| Minimum Ground Clearance | 165 mm |
| Tail Turning Radius | 765 mm |
| Front-Rear Wheelbase | 1095 mm |
| Bulldozer Blade Height | 167 mm |
| Dozer Blade Digging Depth | 88 mm |
| Bucket Capacity | 0.02 m³ |
| Rated Power | 10 kW / 3600 rpm |
| Swing Speed | 14 r/min |
| Gradeability | 30° |
| Bucket Digging Force | 10.2 kN |
| Max Digging Height | 2200 mm |
| Max Dumping Height | 1610 mm |
| Max Digging Depth | 1630 mm |
| Max Digging Reach | 2620 mm |
| Min Turning Radius | 1065 mm |
| Travel Speed | 5.6 km/h |
| Fuel Tank Capacity | 6.2 L |
| Hydraulic Oil Tank | 11 L |
| System Flow Rate | 28.8 L/min |
| Working Pressure | 16 MPa |
| Optional Engines | Koop192 / Ducar420 / Rato420 |
| Main Valve | JX10-01 |
| Gear Pump | PG05-10G83L |
| Travel Motor | BM23-15 |
Key Highlights
- Enclosed cabin standard — weatherproof operator station for year-round outdoor work; canopy version optional
- Wheeled chassis — self-propelled on paved roads, no trailer needed between job sites
- Optional side-swing boom — dig close to walls and fences without repositioning
- Optional three-way throttle valve — quick switching between two hydraulic attachments
- Reinforced inverted boom arm — seamless square-tube structure with built-in pipe protection
- Front dozer blade — stabilizes the machine during digging and grades/backfills on site
- Custom color service — body paint can be specified by RAL color code
Compatible Attachments
Narrow bucket, standard bucket, tilt bucket, sand bucket, thumb clip, hydraulic thumb, quick hitch, rotary quick hitch, grapple, auger, breaker hammer, rake, hedge trimmer, log splitter, grass trimmer, pallet fork, root remover, ripper.
Intended Applications
The HT-10W is suited to orchard trenching, residential landscaping, backyard and indoor renovation, municipal small-pipeline and cable work, and light foundation excavation. Its wheeled design makes it particularly suitable for rental fleets and contractors who move between multiple small jobs each day.
